DEVICE APPLICATION INSTRUCTIONS
- Spray a small amount of glass cleaner onto a cloth and wipe your device clean.
- For Laptops (Full Laptop Designs): make sure you don't apply your art upside down! The bottom edge of the rectangular skin should line up with the laptop hinges. Align one corner and smooth down on to your laptop.
For Laptops (Individual Elements Designs): peel and apply the individual stickers.
- For the iPhone: line up the cut out hole with the camera lens, slowly roll the vinyl down. Apply the extra vinyl to the front of the phone if desired. (For a blow by blow photo tutorial of how to apply your iPhone skin please check out this nice review from testfreaks.com.)
- For the Classic iPod: center the full rectangular piece of art on the back of the device. With the remaining vinyl, line up the square cut-out with the device's screen. Peel off the circles and place on the click wheel.
For the Nano iPod: line up the square cut-out with the device's screen. Wrap it around from left to right. Peel off the circles and place on the click wheel
For the Touch iPod: center the design on the back and apply. Line up the front piece around the home button and smooth out the vinyl.
-
For the Blackberry: carefully apply each piece of the skin with the matching piece of the Blackberry. Don't worry, you'll still be able to remove your Blackberry battery with the skin on.
- If you're not happy with the position, carefully peel up and try again.
- Press firmly from center to edge. You should be able to push out any bubbles.
- Now you're rolling with Infectious Art.
DEVICE REMOVAL INSTRUCTIONS
- 1. Simply pick a corner and peel back at an angle.
